Notecard

5 products

5 products

Quick view
Notecard Cellular
from $45.00
Quick view
Notecard Cell+WiFi
from $49.00
Quick view
Notecard for LoRa
from $9.75
Quick view
Notecard WiFi
$10.00
Quick view
Starnote for Skylo
$49.00

Notecard Cellular

$53.00
/
Shipping calculated at checkout.

Featuring an improved STM32 MCU, an onboard dual SIM capability, and an improved Low IQ power supply, Notecard Cellular is a drop-in functional replacement for original "Green" Notecard at a lower price.

Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with secure, reliable cellular. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

With just two lines of code you can send data to the cloud in minutes, with no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

Notecard is meant to be used with a Notecarrier. Notecard Cellular is compatible with all available Notecarriers. See the Notecarriers section for more details or get started with a Blues Starter Kit.

Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

Available Variations

Key Notecard Cellular Specs

  • Includes a secure element with a factory-installed ECC P-384 certificate, provisioned at chip manufacture.

  • Integrated GPS and accelerometer.

  • Designed to operate on battery power, be "always-on" to maintain time and location, while typically drawing less than 8µA@5V, when idle.

  • Bundled with 10 years of service and 500MB of cellular data.

  • No cellular subscriptions, SIM fees, or monthly minimums apply.

  • PTCRB Certified Module.

Additional Resources

Notecard Cell+WiFi

$72.00
/
Shipping calculated at checkout.

Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with secure, reliable cellular and WiFi. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

Notecard Cell+WiFi allows for dynamic fallback from WiFi to cellular and indoor location tracking via WiFi Triangulation.

Notecard Cell+WiFI (MB) adds an LTE Cat 1 bis Notecard to complement our existing Notecard SKUs. This "Midband" Notecard provides a step-up in performance from 2G/3G, Cat-M, and NB-IoT without a big step-up in price.

With just two lines of code you can send data to the cloud in minutes, with no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

Notecard is meant to be used with a Notecarrier. Notecard Cell+WiFi is compatible with all Notecarriers except Notecarrier A. See the Notecarriers section for more details or get started with a Blues Starter Kit.

Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

Available Variations

Key Notecard Cell+WiFi Specs

  • Includes a secure element with a factory-installed ECC P-384 certificate, provisioned at chip manufacture.
  • Integrated GPS and accelerometer.
  • Designed to operate on battery power, be "always-on" to maintain time and location, while typically drawing less than 8µA@5V, when idle.
  • Bundled with 10 years of service and 500MB of cellular data.
  • No cellular subscriptions, SIM fees, or monthly minimums apply.
  • PTCRB Certified Module.
  • Includes a 2.4 GHz WiFi module with WiFi to Cellular fallback capabilities.

Additional Resources

Notecard for LoRa

$9.75
/
Shipping calculated at checkout.

Notecard for LoRa (2.1)—Same ease of use. Same m.2 connector. 100% more castellated edges—enabling product builders to embed Notecard directly onto a PCB for volume production.

Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with LoRa/LoRaWAN. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

Notecard for LoRa is a lower-cost version of cellular-based Notecards for LoRa only, and is API-compatible with cellular- and WiFi-based Notecards (with some exceptions). Notecard for LoRa now has the option of being on a single-sided PCB and includes castellated edges. This enables developers to use Notecard in any Notecarrier for a POC or Prototype, and embed the module directly into a commercial product for easy volume production. Notecard for LoRa supports The Things Network gateways. Included is a flexible Molex 211140 antenna that supports both 868 MHz (Europe) and 915 MHz (United States) frequencies.

With just two lines of code you can send data to the cloud in minutes, no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

For prototyping, Notecard is meant to be used with a Notecarrier. Notecard for LoRa is compatible with all Notecarriers except Notecarrier XS. See the Notecarriers section for more details or get started with a Blues Starter Kit.

Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

Available Variations

Key Notecard Specs

  • Onboard ultra-low-power STM32WL LoRa MCU.

  • Compatible with LoRaWAN and The Things Network.

Additional Resources


Notecard WiFi

$10.00
/
Shipping calculated at checkout.

Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with WiFi. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

Notecard WiFi is a lower-cost version of cellular-based Notecards for 2.4 GHz WiFi only, and is API-compatible with cellular-based Notecards. Notecard WiFi also supports location tracking via WiFi Triangulation.

With just two lines of code you can send data to the cloud in minutes, with no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

Notecard is meant to be used with a Notecarrier. Notecard WiFi is compatible with all available Notecarriers. See the Notecarriers section for more details or get started with a Blues Starter Kit.

Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

Available Variations

Key Notecard WiFi Specs

  • Utilizes the ESP32-S3-WROOM-1-N8R2 for connecting to 2.4 GHz WiFi networks.
  • JSON- and SoftAP-based provisioning support.
  • Onboard ultra-low power ESP32 MCU with 8MB flash memory.
  • High-performance 3-axis accelerometer and temperature sensor.

Additional Resources

Starnote for Skylo

$49.00
/
Shipping calculated at checkout.

Add satellite failover to any cellular or WiFi Notecard-based solution for $49 with data and no monthly fees.

Starnote for Skylo is an affordable satellite IoT backup device that, much like the Notecard does with cellular, includes satellite uplink and downlink data with the cost of the device, in partnership with Skylo. Starnote offers a JSON-based programing interface consistent with Notecard, providing developers with access to yet another major Radio Access Technology (RAT) using straightforward, accessible semantics.

Starnote for Skylo is a Notecard accessory that is intended to disrupt the conventional wisdom that using satellite requires a high hardware investment (in the hundreds of dollars), and monthly device fees even when devices aren’t communicating with satellites.

As an accessory, Starnote is not a Notecard. It is meant to be used with Notecard, and works with Cellular, Cell+WiFi, and WiFi. From a developer’s point of view, Starnote for Skylo operates as an additional available RAT for the Notecard. A developer uses the Notecard API to specify in Notecard’s mode of operations when to fallback to Satellite, and Notecard handles communications between itself and Starnote.

Available Variations

  • Onboard Satellite and GPS Antennas

  • u.FL Connectors with Provided External Antennas

Key Starnote for Skylo Specs

  • JSON-based API for configuration and communication with Notecard

  • M.2 Key E connector for board-to-board usage and a six-pin JST for wire-to-board applications

  • Available with onboard satellite and GPS antennas or external via u.FL connectors

  • NTN-capable satellite modem with zero-touch configuration

  • Bundled with 18.65KB of satellite data from Skylo. Additional data is priced $0.00075 byte, with a minimum of 50 bytes per transmitted or received satellite data packet, billed monthly in arrears.

  • No satellite provider subscriptions, fees, or monthly minimums apply.

Additional Resources