Notecarrier R

$15.00
/
Shipping calculated at checkout.

Add Notecard to Arduino MKR and PRO boards with this slim Notecarrier!

Notecarriers are companion development boards designed to make it easy to prototype and deploy IoT solutions with the Notecard.

Notecarrier R is a small form-factor Notecarrier, only slightly larger than Notecard itself. Unlike other Notecarriers, Notecarrier R does not include an external SIM slot. It’s similar to Notecarrier B, but instead of a Qwiic connector, it has an ESLOV connector common to many Arduino MKR and PRO Portena boards. ESLOV provides I2C pins, as well as an additional GPIO, which we’ve connected to Notecard’s ATTN pin.

Included is a flexible Molex 209142 antenna for use with either LTE or GPS. If you require a dual LTE/GPS antenna, we recommend adding on the flexible LTE+GPS antenna (or you may choose to use your own preferred antenna).

Notecarriers require a Notecard to function. Notecarrier R is compatible with all available Notecards. See the Notecards section for more details or get started with a Blues Starter Kit.

Available Variations

    Key Notecarrier R Specs

    • Notecard M.2 Key E connector socket and mounting screw receptacle.

    • 2-Pin JST PH connectors for LiPo battery power support.

    • 1 ESLOV port for attaching Notecard to Arduino MKR or PRO boards.

    • DIP switch for using active or passive GPS/GNSS antenna.

      Additional Resources

        Notecard Cellular

        $53.00
        /
        Shipping calculated at checkout.

        Featuring an improved STM32 MCU, an onboard dual SIM capability, and an improved Low IQ power supply, Notecard Cellular is a drop-in functional replacement for original "Green" Notecard at a lower price.

        Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with secure, reliable cellular. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

        With just two lines of code you can send data to the cloud in minutes, with no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

        Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

        Notecard is meant to be used with a Notecarrier. Notecard Cellular is compatible with all available Notecarriers. See the Notecarriers section for more details or get started with a Blues Starter Kit.

        Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

        Available Variations

        Key Notecard Cellular Specs

        • Includes a secure element with a factory-installed ECC P-384 certificate, provisioned at chip manufacture.

        • Integrated GPS and accelerometer.

        • Designed to operate on battery power, be "always-on" to maintain time and location, while typically drawing less than 8µA@5V, when idle.

        • Bundled with 10 years of service and 500MB of cellular data.

        • No cellular subscriptions, SIM fees, or monthly minimums apply.

        • PTCRB Certified Module.

        Additional Resources

        Notecard Cell+WiFi

        $72.00
        /
        Shipping calculated at checkout.

        Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with secure, reliable cellular and WiFi. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

        Notecard Cell+WiFi allows for dynamic fallback from WiFi to cellular and indoor location tracking via WiFi Triangulation.

        Notecard Cell+WiFI (MB) adds an LTE Cat 1 bis Notecard to complement our existing Notecard SKUs. This "Midband" Notecard provides a step-up in performance from 2G/3G, Cat-M, and NB-IoT without a big step-up in price.

        With just two lines of code you can send data to the cloud in minutes, with no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

        Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

        Notecard is meant to be used with a Notecarrier. Notecard Cell+WiFi is compatible with all Notecarriers except Notecarrier A. See the Notecarriers section for more details or get started with a Blues Starter Kit.

        Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

        Available Variations

        Key Notecard Cell+WiFi Specs

        • Includes a secure element with a factory-installed ECC P-384 certificate, provisioned at chip manufacture.
        • Integrated GPS and accelerometer.
        • Designed to operate on battery power, be "always-on" to maintain time and location, while typically drawing less than 8µA@5V, when idle.
        • Bundled with 10 years of service and 500MB of cellular data.
        • No cellular subscriptions, SIM fees, or monthly minimums apply.
        • PTCRB Certified Module.
        • Includes a 2.4 GHz WiFi module with WiFi to Cellular fallback capabilities.

        Additional Resources

        Notecard for LoRa

        $9.75
        /
        Shipping calculated at checkout.

        Notecard for LoRa (2.1)—Same ease of use. Same m.2 connector. 100% more castellated edges—enabling product builders to embed Notecard directly onto a PCB for volume production.

        Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with LoRa/LoRaWAN. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

        Notecard for LoRa is a lower-cost version of cellular-based Notecards for LoRa only, and is API-compatible with cellular- and WiFi-based Notecards (with some exceptions). Notecard for LoRa now has the option of being on a single-sided PCB and includes castellated edges. This enables developers to use Notecard in any Notecarrier for a POC or Prototype, and embed the module directly into a commercial product for easy volume production. Notecard for LoRa supports The Things Network gateways. Included is a flexible Molex 211140 antenna that supports both 868 MHz (Europe) and 915 MHz (United States) frequencies.

        With just two lines of code you can send data to the cloud in minutes, no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

        Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

        For prototyping, Notecard is meant to be used with a Notecarrier. Notecard for LoRa is compatible with all Notecarriers except Notecarrier XS. See the Notecarriers section for more details or get started with a Blues Starter Kit.

        Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

        Available Variations

        Key Notecard Specs

        • Onboard ultra-low-power STM32WL LoRa MCU.

        • Compatible with LoRaWAN and The Things Network.

        Additional Resources


        Notecard WiFi

        $10.00
        /
        Shipping calculated at checkout.

        Notecard is a device-to-cloud data pump that reduces the complexity of building connected solutions with WiFi. As an embeddable system on module (SoM), Notecard can be used with any microcontroller for both greenfield and retrofit projects using your own design, or one of our custom designed Notecarriers.

        Notecard WiFi is a lower-cost version of cellular-based Notecards for 2.4 GHz WiFi only, and is API-compatible with cellular-based Notecards. Notecard WiFi also supports location tracking via WiFi Triangulation.

        With just two lines of code you can send data to the cloud in minutes, with no complex device registration or provisioning required. With a powerful JSON-based API, you can program Notecard over USB, or control it from your preferred microcontroller or single-board computer using one of our open-source firmware libraries. Connect from your preferred host to Notecard using Serial or I2C.

        Notecard is designed to work with a cloud service for ingesting and processing device data. Notehub provides secure device connectivity, project and fleet management, and simple routing to 3rd party cloud services.

        Notecard is meant to be used with a Notecarrier. Notecard WiFi is compatible with all available Notecarriers. See the Notecarriers section for more details or get started with a Blues Starter Kit.

        Ordering Note: Notecards purchased from the Blues Shop will ship with a Developer Firmware Release version pre-installed. If you require a Long-Term Support (LTS) version for a Shop order, please contact Sales for assistance.

        Available Variations

        Key Notecard WiFi Specs

        • Utilizes the ESP32-S3-WROOM-1-N8R2 for connecting to 2.4 GHz WiFi networks.
        • JSON- and SoftAP-based provisioning support.
        • Onboard ultra-low power ESP32 MCU with 8MB flash memory.
        • High-performance 3-axis accelerometer and temperature sensor.

        Additional Resources

        Back to Notecarrier